Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8710227

- Product Categories
- Friendly Links
- home > Supply > Chuzhou submersible pump (gas station) manufacturers - submersible pump price - guaranteed submersible pump brands
Chuzhou submersible pump (gas station) manufacturers - submersible pump price - guaranteed submersible pump brands
Information Name: | Chuzhou submersible pump (gas station) manufacturers - submersible pump price - guaranteed submersible pump brands |
Published: | 2012-01-17 |
Validity: | 90 |
Specifications: | 50 * 50 |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | Chuzhou submersible pump (gas station) manufacturers - submersible pump price - guaranteed submersible pump brands Specifications Model: HS-15496-309 Submersible pump technical parameter: For small gas stations and oil depots Life: 10 years Medium oil: gasoline, diesel, kerosene, gasoline mixture, ethanol, methanol, etc. 0.75 horsepower, voltage: 220V 50HZ, single, pump inlet pressure of 2.1 kg, the maximum pump flow rate 200 l min mouth, can take four standard grease gun 1.5 horsepower, voltage: 220V 50HZ, single, pump inlet pressure of 2.1 kg, the maximum pump flow rate 240 l min mouth, can take six standard grease gun. 1 - Connection warehouse 2-- flowlines (2-inch, long-200MM) 3 - pump comes up tube (diameter: 4-inch pipe, 200 mm high) 4 - tank stand pipe 5 - Power-ray tube 6-- manhole 7-- tank Petrol station was preparing to work: 1, from the tanker to the submersible pump control cabinet laying 2 * 0.5 square signal line 2, submersible pumps from the tank to the control cabinet 2 * 2.5 square laying the power lines. 3, for 4 of the explosion-proof hose tap, docking flange riser flowlines mating flange. 4, one hole on the hole diameter is 108MM, and welding a 4-inch riser high 200MM, requirements, and the vertical centerline tank, prepare a standard 4-inch flange, a pipe welded to the stand, another piece of solder in the pump with the stand pipe. Flange butt installation. 5, the outlet is the DN50 tube, ready for 50 of the flange, pump tubing and comes with 200MM out of the laying of oil pipeline filling stations reserved port, the flange butt |
Admin>>>
You are the 32246 visitor
Copyright © GuangDong ICP No. 10089450, Anhui Science and Technology Holding Co., Ltd. Huasheng All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 32246 visitor
Copyright © GuangDong ICP No. 10089450, Anhui Science and Technology Holding Co., Ltd. Huasheng All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility